Author Topic: QHY8L with a Rokinon 16mm F2  (Read 19 times)

0 Members and 1 Guest are viewing this topic.

Ivor

  • Chairman
  • O. A. S.
  • Star Class
  • *
  • Posts: 592
QHY8L with a Rokinon 16mm F2
« on: Oct 17, 2017, 10:24:57 »
In the summer I bought a Rokinon 16mm F2 lens for my canon 400D alas the canon died and I'm now investigating whether I can connect it up with my QHY8L instead. I can't find any details about spacing but I knew roughly and got this result from a 25sec exposure (alas the lens had misted over).



As you can see there are black shaded areas on either side of the image (not the border) is this caused by the lens being too close or too far away from the sensor? My natural thought is too far but it's so long ago since I've used my kit I have no confidence.
« Last Edit: Oct 17, 2017, 10:41:27 by Ivor »

Mac

  • O. A. S.
  • Galaxy Class
  • *
  • Posts: 3249
    • smile
Re: QHY8L with a Rokinon 16mm F2
« Reply #1 on: Oct 17, 2017, 17:27:03 »
if you look at your camera you will have the focal plane marked on it, normally a circle with a line hthrough it, this is where your (film) sensor is.
The distance from that point to the front of your lens can be measured with a ruler.
If you then fit it to your QHY and make sure the distance from the sensor to the front of then lens is the same you can use this as a starting point,
You might find that you will have to move it a few mm either side.

One other thing, do it in daylight, much easier to set up and adjust.

Mac.
Never, ever, argue with an idiot. They'll drag you down to their level and beat you with experience.
If you argue with an idiot, there are two idiots.