Orpington Astronomical Society

Astronomy => Astrophotography => Topic started by: Mike on May 18, 2015, 09:09:56

Title: Timelapse Tests with Star Adventurer
Post by: Mike on May 18, 2015, 09:09:56
Thanks Fay for lending me your Star Adventurer at DSC.

I did a couple of tests with it. One for timelapse panning and one for sidereal tracking. I made a short timelapse video out of each sequence. Here are the results. Raw images with no processing :

VIDEO 1 (https://www.youtube.com/watch?v=iUQB31P3p_Q)

VIDEO 2 (https://www.youtube.com/watch?v=1vNebTmW1yo)

I obviously polar aligned on a star that wasn't Polaris as you can see it was off.

Overall I was very impressed with the Star Adventurer. Nicely engineered tiny driven mount head with some nice features. The only thing I was disappointed with was the timelapse feature that would only pan a maximum of 60ยบ. I have been wondering if this limitation can be overcome somehow.

However, i'll definitely be getting one.
Title: Re: Timelapse Tests with Star Adventurer
Post by: Fay on May 18, 2015, 14:23:29
I may be reading it wrong, Mike, but on the instructions for timelapse it says it goes 90 deg and then reverses to go back 90 deg.
Title: Re: Timelapse Tests with Star Adventurer
Post by: Mike on May 18, 2015, 20:20:43
No it was definitely 60 degrees Fay.
Title: Re: Timelapse Tests with Star Adventurer
Post by: The Thing on May 18, 2015, 20:25:06
I seem to recall various increments for the rotation, really only useable if you use the built-in shutter control. Manual here. (https://www.skywatcher.com/downloads/Star%20Adventurer-SA-F-100326V1-EN.pdf)
Title: Re: Timelapse Tests with Star Adventurer
Post by: Mike on May 18, 2015, 20:51:04
Duncan it will only rotate beyond 60 degrees in sidereal, solar, lunar or 0.5x sidereal. The useful rates for time lapse photography, i.e. 2x, 4x 6x 12x will only go as far as 60 degrees then it will go back the other way. Bit naff and not very well thought out.

I'm already thinking of replacing the controller board with an Arduino and writing my own software for it.
Title: Re: Timelapse Tests with Star Adventurer
Post by: Kenny on May 18, 2015, 20:53:34
Quote from: Mike on May 18, 2015, 09:09:56

VIDEO 2 (https://www.youtube.com/watch?v=1vNebTmW1yo)


That is very cool!  8)
Title: Re: Timelapse Tests with Star Adventurer
Post by: Fay on May 18, 2015, 20:54:58
Mike dont know what happened with the SGL link, but it was regarding doing what you have just suggested with  Arduino




Title: Re: Timelapse Tests with Star Adventurer
Post by: Mike on May 18, 2015, 21:02:44
Fay I took a look at that. It was a project the guy started and never finished. However he has put up pictures of the internal workings which will help a lot. Thanks.
Title: Re: Timelapse Tests with Star Adventurer
Post by: Fay on May 18, 2015, 22:54:20
Oh good
Title: Re: Timelapse Tests with Star Adventurer
Post by: Fay on May 19, 2015, 15:23:07
Just remembered, I did a little dance in front of your time lapse, Mike, but it did not show up!
Title: Re: Timelapse Tests with Star Adventurer
Post by: RobertM on May 19, 2015, 19:22:49
Can-Can ?
Title: Re: Timelapse Tests with Star Adventurer
Post by: Kenny on May 20, 2015, 23:39:30
Mike - What camera and settings did you use for Video 2?
Title: Re: Timelapse Tests with Star Adventurer
Post by: Mike on May 20, 2015, 23:43:06
Kenny it was a Nikon D7000 with an f2.8 10.5mm fisheye lens. Shots were 10 seconds each with a 5 second gap in between. The wonky angle was due to fixing the camera to a fixed telescope bracket and it needed to be a ball head to allow full adjustment.
Title: Re: Timelapse Tests with Star Adventurer
Post by: Kenny on May 21, 2015, 00:58:30
Thanks. Surprised by how much detail was captured with only 10 seconds of data. The advantage of a truly dark site.